WORKTUBE SEALS

Stainless steel gas tight ends are available, enabling the introduction of an inert gas down portable ceramic tubes. It is also possible to fit a gland for a probe thermocouple.

WORK TUBES

Various ceramic work tubes with a selection of inside diameters and length. Temperature ranges (Depending on material) from 1200ºc to 1800ºc

INSULATING PLUGS

Ceramic insulating plugs to prevent heat loss and improve uniformity in tube furnaces.

FLOWMETERS

Inert gas flowmeters (typical gases would be nitrogen or argon) with needle valve for adjustment.

WORK BASKETS

Stainless steel work baskets for heat treatment procedures (hardening and tempering up to 1100ºc)

FURNACE TABLES

Furnace tables with option of quench tank and basket.

ROLLER TABLES

Roller tables for simple loading and unloading of work baskets.

STAINLESS LINERS

Stainless steel liners and retorts (with gas inlets) available for temperatures up to 1100ºc ideal for introducing and containing inert gases such as nitrogen and argon.

HEATING ELEMENTS

Resitance wire and silicon carbide elements available from stock. We can also provide a quick turn around for special elements for other makes of furnaces and ovens.

CRUCIBLES AND TONGS

We can supply a wide range of crucibles (conical, cylindrical, flat-bottom) from 1200ºc to 1800ºc. We also provide stainless steel tongs, modified to suit the shape of the crucible.

TIMESWITCH

A digital timeswitch (24 hour 7 day) with battery backup is available, fitted into the control panel to allow precise setting of a regular daily/weekly heating routine.

INERT GAS INLET

For use with chamber furnaces, a 6mm stainless pipe 9 for a simple hose connection) is fitted through the back wall of the furnace. Suitable for inert gases or oxygen

CALIBRATED THERMOCOUPLES

All types of thermocouples can be provided. We can also supply calibration certificated at 3 points (customer choice) supplied by an independent UKAS/NAMAS accredited laboratory, traceable to UK national standard.